Sony Handycam HDR-HC7 Software Manual page 9

5 Connect the other end of the USB cable to the USB port on your computer.
The [USB SELECT] screen is displayed on the LCD screen of your camcorder.
Tip
When the screen is not displayed, select the item from the menu. For selecting the menu, refer to the operating
instructions supplied with your camcorder.
6 Select [ MemoryStick].
Recommended USB cable connection
Connect your camcorder as shown in the following illustration.
Connect the USB cable from your camcorder to the USB port on the computer and make sure no
other USB devices are connected.
If your computer has a USB keyboard and a USB mouse as standard equipment, leave them
connected and connect the camcorder to an available USB jack with the USB cable.
Notes
Operation is not guaranteed if you connect multiple USB devices to the computer.
Operation is not guaranteed if you connect the USB cable to the USB port on a keyboard or USB hub.
Make sure to connect the cable to the USB port on the computer.
Operation is not guaranteed on all the system requirement.
To disconnect the USB cable
When [USB CONNECTING] is displayed on the LCD screen of your camcorder, follow the procedure below to disconnect the
USB cable.
If [USB UNCONNECTED] is displayed on the LCD screen of your camcorder, do step 4 and 5 below.
If [USB CONNECTING] and [USB UNCONNECTED] are not displayed on the LCD screen of your camcorder, do only step 5
below.
1 Click the [Unplug or eject hardware] icon on the task tray.
2 Click [Safely remove USB Mass Storage Device].
3 Click [OK].
4 Touch [END] on the LCD screen of your camcorder.
5 Disconnect the USB cable from the computer.
Notes
Do not disconnect the USB cable while the access lamp is lit.
Before turning off your camcorder, disconnect the USB cable following the proper procedures described above.
Disconnect the USB cable using the proper procedures described above. Otherwise, files stored in a "Memory Stick Duo"
may not be updated correctly. Also, disconnecting the USB cable improperly may cause a malfunction of the "Memory
<Details>