Fujitsu CELSIUS W4 Series Operating Manual page 54

System expansions
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
2
1
► Push the board into the slot (1).
► Swivel the retaining clamp back again until you feel it click into place (2).
► If necessary, connect the cables to the board.
► Close the casing (see
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
50
"Closing the casing", Page 36).
Fujitsu Technology Solutions