Panasonic KX-TG2357C Operating Instructions Manual page 21

PQQX14031ZA.book 21 ページ ２００４年６月２１日 月曜日 午後３時４４分
Base unit ringer tone
(use either the handset or the base unit)
Base Unit
Make sure the base unit is not being used.
Press VOLUME [<] or [>], then select the desired ringer tone by pressing
[1] to [7].
[1] to [3] : Bell ringer patterns
• After pressing VOLUME [
tone.
• The base unit will ring and the ringer tone will change.
• To stop ringing, press [STOP].
Setting the base unit ringer tone by using the
1 Press [MENU].
Scroll to "Initial setting" by pressing [d] or [B], then press
2
Select.
3 Scroll to "Set base unit" by pressing [d] or [B], then press Select.
4 Press Select at "Ringer tone".
5 Select the desired ringer tone by pressing [d] or [B].
• The base unit will ring and the ringer tone will change. If the base unit ringer
volume has been turned off, the base unit will not ring (p. 19).
• You can also select the ringer tone by pressing [1] to [7].
Press Save, then press [OFF].
6
Programmable Settings
[4] to [7] : Melody patterns
] or [ ], the base unit will ring using the current ringer
< >
Handset
21