Using The I.link Cable (Optional) - Sony DCR-TRV260 - Digital Handycam Camcorder Application Manual

1
Click the [Unplug or eject hardware]
icon on the task tray.
Click this icon.
2
Click [Safely remove Sony Camcorder]
([Unplug or eject hardware] in Windows
2000/Windows Me).
3
Click [OK] in Windows 2000/Windows
Me.
4
Disconnect the USB cable from the
camcorder and computer.
If [USB MODE] does not appear on the LCD
screen, do only step 4 above.
For Windows 98/Windows 98SE
Do only step 4 above.
Note
b
• Do not disconnect the USB cable while the access
lamp is lit.
Recommended connection
Connect as shown in the following illustrations
to operate the camcorder correctly.
• Connect the camcorder to a computer via the
USB cable (supplied). Make sure no other
USB devices are connected to the computer.
• If your computer has a USB keyboard and a
task tray
Click here.
b
• Operation is not guaranteed if you connect two or
• Operation is not guaranteed if you connect the USB
• Make sure to connect the cable to the USB jack on
• Operation is not guaranteed on all the recommended
USB mouse as standard equipment, leave
them connected and connect the camcorder to
an available USB jack with the USB cable
(supplied).
Notes
more USB devices to the computer.
cable to the USB jack on a keyboard or USB hub.
the computer.
environments.

Using the i.LINK cable (optional)

to i.LINK (IEEE1394)
connector
to DV
Interface
Connecting to a Windows computer
i.LINK cable
(optional)
,continued
15