Bosch CTL636E 6 Series Instruction Manual page 54

en Home Connect
Additional settings
Home Connect can be adapted to your
individual needs at any time�
Note: The fully automatic coffee machine
must be connected to the WLAN network�
Disconnecting
The fully automatic coffee machine can be
disconnected from the WLAN network at
any time�
F
If the fully automatic coffee machine
is disconnected from the WLAN
network, it cannot be operated using
Home Connect�
■ Touch A to open the menu�
■ Touch [ Home Connect ]�
■ Touch [ Disconnect from network ]�
The connection to the network and app is
disconnected� Wi-Fi and remote start are
switched off.
F
Information about the WLAN network
is cleared�
Connecting with app
The Home Connect app can be installed on
any number of mobile devices, which can
then be used to connect to the fully auto-
matic coffee machine.
The fully automatic coffee machine must
already be connected to the WLAN network�
■ Open the app on the mobile device�
■ Touch A to open the menu�
■ Touch [ Home Connect ]�
■ Touch [ Connect with app ] to connect to
the appliance with the app�
Remote start
If you wish e�g� to start drinks dispensing
on the fully automatic coffee machine via
a mobile device, Remote start must be
activated�
50
B
Risk of burns!
If an unattended remote start takes
place, third parties might be scalded
if they reach under the coffee dis-
penser during drinks dispensing� You
should therefore make sure that with
an unattended remote start that there
is no risk to other people, in particu-
lar not to children, or to property�
F
The [ R emote start ] text field is is
only visible if connection with Home
Connect has been successfully
completed�
F
If Remote start is switched off, only
the modes of the fully automatic
coffee machine are displayed in the
Home Connect app�
■ Touch A to open the menu�
■ Touch [ Home Connect ] �
■ Touch [ Remote start ] to switch the func-
tion Remote start "On" and "Off"�
Device Info
Display for network and device information
■ Touch A to open the menu�
■ Touch [ Home Connect ] �
■ Touch [ appliance Info ] � The SSID, IP,
MAC address and serial number of
the appliance are displayed for a few
seconds�
Display
The top right-hand corner of the display
shows the Home Connect status with a
symbol:
Connected to the network
Not connected to the network
No connection to server