Battery Recommendations And Safety Precautions; Power On The Computer - Honeywell ScanPal EDA5S User Manual

Battery Recommendations and Safety Precautions

Caution: Improper battery replacement or incompatible device usage may
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Power On the Computer

After you have fully charged and installed a battery, power On the computer for the
first time:
•
EDA5S Mobile Computer Series User Guide
result in risk of burns, fire, explosion, or other hazard. Dispose of
lithium-ion batteries according to local regulations. Risk of fire and
burns if improperly handled. Do not open, crush, heat above 60°C
(140°F), or incinerate.
To learn more about Battery Maintenance for Portable Devices, go to
honeywell.com/PSS-BatteryMaintenance.
For maximum battery life, charge the battery at 20 °C (68 °F) to 25 °C (77 °F)
and store at 20 °C (68 °F) with a 30%-50% charge.
Do not store the battery at temperatures above 60 °C (140 °F). Storage above
60 °C (140 °F) may damage the battery.
Charge the battery before use. Battery ships with only a partial charge.
See Charge the Battery Before Use
Use of this battery in other devices could result in damage to the device or
battery.
Avoid dropping the battery or computer. If you suspect that the battery or
computer is damaged, send it to Honeywell service center for inspection.
Replace the battery only with another BAT-EDA5S model battery that matches
the part number noted in the
guide. These batteries have been tested in accordance with applicable safety
standards. Contact your Honeywell sales representative or distributor if this
battery is no longer available.
Discarded batteries may create a safety hazard. Before disposal, cover the
battery contacts with electrical insulating tape.
Do not modify the battery or attempt to insert foreign objects into it.
Do not solder directly to the battery contacts.
Do not drop the battery or apply mechanical shocks or pressure to it.
Do not immerse batteries into, or expose them to, water or seawater.
Do not incinerate, microwave, throw into a fire, or expose batteries to
temperatures above the maximum rating.
Do not disassemble a battery or try to open or penetrate its housing.
Press and hold the Power button for approximately 3 seconds, and then release
the button.
on page 5 for approved charging methods.
Battery Part Numbers (see page 5) section of this
11