Philips sonicare For Kids Manual page 19

When you handle batteries, make sure that your
hands, the product and the batteries are dry.
To avoid accidental short-circuiting of batteries
after removal, do not let battery terminals come
into contact with metal objects (e.g. coins,
hairpins, rings). Do not wrap batteries in
aluminum foil. Tape battery terminals or put
batteries in a plastic bag before you discard them.
To remove the rechargeable battery, you need a flat-
head (standard) screwdriver. Observe basic safety
precautions when you follow the procedure outlined
below.
1 To deplete the rechargeable battery of any charge,
remove the handle from the charger, turn on the
Philips Sonicare for Kids and let it run until it stops.
Repeat this step until you can no longer turn on the
Philips Sonicare for Kids.
2 Remove and discard the brush head.
3 Insert a screwdriver into the slot located in the
bottom of the handle and turn counterclockwise until
you see a gap between the bottom cap and the
handle.
4 Insert the screwdriver into the gap and pry the
bottom cap out of the handle.
5 Hold the handle upside down and push down on the
shaft to release the internal components of the
handle.
19
English