Precautions When Using Art Mode; What Is Remote Support - Samsung UE43LS03N User Manual

Precautions when using Art mode

• The motion sensor is located at the bottom of the TV. Do not block the sensor at the front
of the TV. The motion sensor as well as the brightness and colour tone of the screen can be
affected.
• Art mode uses algorithms to minimise image burn-in that can be caused by displaying still
images on the screen for long periods of time.
• The performance of the sensor may vary depending on the TV installation and operating
environment.
– The screen brightness and colour tone may be affected depending on the colour of the
floor on which the TV stands.
– In an environment where special light sources other than standard light sources
(halogen, fluorescent) are used, the sensor's motion recognition performance may vary
depending on the positions, types, and number of the light sources.
– If the area around the TV is too dark or bright, the screen brightness may be limited or
the sensor may not work normally.
– If the TV is installed too high or too low, the sensor may not work normally.
– The motion sensor may sense motion from a flashing LED, a pet, a car moving outside
the window, or other occurrence and start operating.
• Depending on the Auto Power Off (
Off) function settings, the TV may turn off when there is no user input in Art mode, such as
inputs from the remote control.
• > Settings > General > System Manager > Time > Sleep Timer and Off Timer function
does not work in Art mode.
• > Settings > General > System Manager > Auto Protection Time function does not
work in Art mode.

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician
who can remotely:
• Diagnose your TV
• Adjust the TV settings for you
• Perform a factory reset on your TV
• Install recommended firmware updates
How does Remote Support work?
You can easily get Samsung Remote Support service for your TV:
1. Call the Samsung Contact Centre and ask for remote support.
2. Open the menu on your TV and go to the Support section. (
3. Select Remote Management, then read and agree to the service agreements. When the
PIN screen appears, provide the PIN number to the technician.
4. The technician will then access your TV.
> Settings > General > Eco Solution > Auto Power
> Settings > Support)
English - 35