Table of Contents
Advertisement
Display Control Unit Buttons and Connector Reference Guide
Power ON - To power on the SCV1, press and release the
power button.
Power OFF - Press and hold the power button for 2 sec-
onds to completely shut down the system.
Audio Standby Mode - When the SCV1 is in the Audio
Power button
mode, press and release the power button to put the system
in standby, which turns off the front audio and FM outputs.
Video Standby Mode - When in the SCV1 is in the Video
mode, press and release the power button to put the sys-
tem in standby, which turns off the front audio and FM out-
puts. Press the power button again to turn the system on.
A/V: Pressing and releasing this button toggles the mode
between the SIRIUS Satellite Radio mode and SIRIUS
Backseat TV mode. When in the audio/video mode, the
A/V / Menu button
DCU controls the backseat TV operation.
Menu: Pressing and holding the button accesses the
Menu Options to make setup and feature changes.
Memo (Memory): Pressing and releasing this button saves
artist names and/or song titles. You can store up to 20
artist/song title combinations. The system will alert you
when a stored artist or song is played on any channel.
Memo / S-Seek
button
S-Seek: Pressing and holding the button will enter the
recall mode, displaying the stored artist/song titles.
The Memo / S-Seek button is functional only in the Audio
mode.
[
]
14
Connectors & Controls
Display Control Unit Buttons and Connector Reference Guide
Navigates through the category list screens which dis-
Category < > buttons
plays the Satellite Radio channel categories. The category
buttons are not operational when in Video mode.
Navigates through display screens and makes selections
of items highlighted on the display screen. Pressing +
increases the channel number (down the list), and moves
Channel + / —
down when in a menu list.
buttons
Pressing — decreases the channel number (up the list),
and moves up in when in a menu list. Pressing and holding
either + or — will rapid tune the audio channels.
Pressing this button selects a highlighted item in a menu
Select button
or list.
The Band / P.Tune button is functional only in the Audio
mode.
Band: This button switches between the preset banks A
Band / P.Tune button
through E, which hold 6 presets each for a total of 30.
P.Tune: Pressing and holding the button enables the
Preset Tune Mode, which allows for viewing and browsing
of stored presets using the channel + and — buttons.
[
]
15
Connectors & Controls
Advertisement
Table of Contents
