PASCO OS-8516A Instruction Sheet

1
Included Equipment
1. Mirror
2. Convex Lens
3. Concave Lens
4. Acrylic Rhombus
5. Hollow Lens
6. Storage Box/Water Tank
with foam insert
and white plastic sheet
Recommended Equipment
Basic Optics Light Source
800-772-8700
®
Ray Optics Kit
2
3
Part Number
636-05100
636-05501
636-05502
636-05611
OS-8511
740-177
740-07863
648-09744
OS-8470
OS-8516A
4
5
Introduction
The Ray Optics Kit is a set of optics components designed for
use with a ray box such as the Basic Optics Light Source. The
storage box doubles as a tank for studying lenses under water.
About the Components
To use any of the components, place them on a flat tabletop in
the path of rays from your ray box (either a single ray or paral-
lel rays). Place a white sheet of paper on the table to facilitate
ray tracing and to make the rays more visible. The concave
and convex lenses have one flat edge. Place the flat edge on
the table so the lens stands stably without rocking.
The hollow lens has three sections that you can fill with water
or leave empty to make lenses of different shapes. To study a
lens made of air and surrounded by water, use the storage box
as a water tank. Remove the foam insert, but leave the white
plastic sheet in the box to serve as a reflective surface. Put the
hollow lens in the box with a small weight on top to stop it
from floating. Fill the box with water to just below the top of
the hollow lens. Use an eye dropper or pipette to empty and
fill the sections of the lens. Use a pencil to trace rays on the
plastic sheet under water.
I n s tr u c t i o n S he e t
0 1 2 -0 5 6 2 7 G
6
www.pasco.com