Hardware Installation - SimpleTech SimpleShare STI-NAS/160 Quick Start Manual

H
ARDWARE
Network
DC-IN Jack
AC Power Connection
Connect the AC power adapter to the DC-IN jack on SimpleShare. Connect the power
plug to a 120V electrical outlet, power strip or UPS (uninterruptible power supply).
Only use the power adapter that came with your SimpleShare. Using a different
power adapter may damage SimpleShare and voids your warranty.
Expanding SimpleShare Capabilities
To add storage or set up printer sharing on SimpleShare, connect an additional drive or
printer to a USB port on SimpleShare. Then, run SimpleShare Administrator and setup
the device. Detailed instructions on attaching a USB drive or printer to SimpleShare are
provided in the SimpleShare User's Guide.
R N
UNNING AS
NASFinder searches your network for attached SimpleShare servers, then assists you
in performing basic configuration tasks like renaming SimpleShare, changing its logon
security settings and mapping shared folders. Insert the NASFinder Setup CD into your
computer's CD-ROM drive. If NASFinder does not start automatically, click the Start
menu, select Run. In the Run dialog box, enter x:nasfinder.exe (where x is the drive
letter of the CD-ROM drive) and click OK. Follow the onscreen instructions to locate
SimpleShare and complete the setup process.
During setup, NASFinder prompts you to enter SimpleShare's administration username
and password. If you are setting up SimpleShare for the first time or if you have never
changed the username or password, enter the default username "admin" and password
"simple." Refer to NASFinder online help for additional information.
I
NSTALLATION
USB
F
INDER
Network Connection
Plug the Ethernet cable into
the Network port on
SimpleShare. Connect the
opposite end of the Ethernet
cable to an available port on
your network, network
switch or router.
4