Polycom VVX-600 Quick Reference Manual page 3

Barracuda Phone System
To enable call forwarding, press the Forward soft key.
If the phone has multiple lines, select the line to forward.
Select the type of forwarding, select a destination, and press the Enable soft key.
The phone display indicates call forwarding is enabled.
To disable, press the Forward soft key, select type, then press Disable.
Ringer and Handset Volume
To change the ringer volume, when the phone is idle, press the (–) or (+) button at the bottom
of the keypad.
To change the volume of a call, during an active call, press the (–) or (+) buttons to adjust the
volume of the handset, speakerphone, or headset, whichever is active.
Directories
Press the Home key, arrow over to Directories, and press the OK key.
Select Contact Directory and press the OK key.
Use the up/down arrows to select a contact.
Press the Dial soft key to call.
Special Characters
When entering a destination with alphanumerics or special characters, pause momentarily
between key presses. For example, when dialing **<ext> press *, pause for a moment, press *
again, then dial the extension.
Polycom VVX-600 VoIP Phone Quick Reference Guide 3 / 4