Advertisement
Operation
1.
Verify that player/recorder connections work without CT-100.
2.
Connect the CT-100 unit as shown on page 3.
3.
The red/green indicator light signifies CT-100 has power. Select the
desired video enhancement mode by pressing the Mode button. The Mode
button cycles between four enhancement modes as follows:
Pressing the button four times begins the cycle again.
4.
The LED indicator light shows which Enhancement mode is selected. For
example, a steady green light means the CT-100 will output in the Normal
video mode. Use the steady indicator light as a fixed point to determine the
desired enhancement mode. Review the chart below to determine the
correct setting. If unsure which video enhancement mode is selected, look
at your video monitor while toggling through the options.
Red light = standby
5.
Select A/V input on your recording VCR or DVD and press RECORD.
6.
Then press PLAY on your playback device.
CT-100 Controls and Functions
Video Output
Video Input
Red/Green
Power
Indicator
Button
Light
Power jack
Video
Mode
Mode
Sequence
Advertisement
