Vivotek FD816B-H User Manual page 194

VIVOTEK
<product dependent>
7.12 Exposure window setting per channel
Group: exposurewin_c<0~(n-1)> for n channel profucts
n denotes the value of "capability_nvideoin"
NAME VALUE
mode auto, custom,blc
* Available values are listed in
"capability_image_c<n>_exposu
re_winmode"
Group: exposurewin_c<0~(n-1)>_win_i<0~(k-1)>
n denotes the value of "capability_nvideoin", k denotes the value of "capability_image_c<n>_exposure_winnum".
(Only available when custom is listed in "capability_image_c<n>_exposure_winmode" and valid when
"exposurewin_c<n>_mode"=custom)
NAME VALUE
enable <boolean>
policy 0~1
home <0~320,0~240>
size <0~320x0~240>
194 - User's Manual
lpcparkinglot,
lpcstreet
<product
dependent>
(Only available when "capability_image_c<n>_exposure_mode"=1)
SECURITY
(get/set)
4/4
SECURITY
(get/set)
4/4
4/4
4/4
4/4
"capability_image_c<n>_scenemode_support
" is 1
* Available value is listed in
"capability_image_c<n>_scenemode_support
type"
DESCRIPTION
"auto": Use full image view as the only
exposure window.
"custom": Use custom windows.
"blc": Use BLC(Back Light Compensation),
and the only exposure window is located at the
center of view.
DESCRIPTION
Enable or disable the window.
0: Indicate exclusive.
1: Indicate inclusive.
* Only available when exclusive is listed in
"capability_image_c<n>_exposure_wintype".
Left-top corner coordinate of the window.
* Only available when qvga is listed in
"capability_image_c<n>_exposure_windomai
n".
Width and height of the window.
* Only available when qvga is listed in
"capability_image_c<n>_exposure_windomai
n".