Cadillac CRC 2021 Manual page 311

Cadillac XT4 Owner Manual (GMNA-Localizing-MidEast-14584650) - 2021 -
CRC - 7/15/20
Dinghy Towing
Caution
If the vehicle is towed with all four
wheels on the ground, the
drivetrain components could be
damaged. The repairs would not be
covered by the vehicle warranty. Do
not tow the vehicle with all four
wheels on the ground.
The vehicle is neither designed nor
intended to be towed with all four
wheels on the ground. If the vehicle
must be towed, a dolly should be
used. See the following information on
dolly towing.
Dolly Towing
Loading up to the Dolly
1. On level ground start the engine.
2. Release the park brake.
3. Apply the brake pedal and hold
until the end of step 5.
4. Push and hold the Electric Parking
Brake (EPB) switch. After
15 seconds, the EPB amber telltale
will begin flashing in the IP cluster.
5. When the indicator flashes amber,
release the EPB within five seconds.
Then, push and release the EPB
switch and release the brake pedal.
VEHICLE CARE
6. The EPB amber telltale will remain
flashing and parking brake will be
released if process is successful.
7. Put the front wheels on the dolly.
8. Shift the transmission to P (Park).
9. Turn the vehicle off.
10. Secure the vehicle to the dolly.
11. Follow the dolly manufacturer's
instructions for preparing the
vehicle and dolly for towing.
12. Open the hood.
13. Disconnect the negative (-)
terminal connector from the
12 volt battery.
14. Close and latch the hood.
Unloading from the Dolly
1. On level ground open the hood.
2. Connect the negative (-) terminal
connector to the 12 volt battery.
3. Close the hood.
4. Follow the dolly manufacturer's
instructions for preparing the
vehicle and dolly for unloading.
5. Unsecure the vehicle from the
dolly.
6. Start the engine.
311