40
Settings
•
Auto mode
Your phone is "visible" to other BT
devices for five minutes. You will
then be asked if "visibility" should
continue.
•
Always visible
Your phone is always "visible" to oth-
er BT devices. These devices can cre-
ate a connection to your phone and
be added to the known device list if
necessary.
BT audiostream
When a Bluetooth headset is used,
all audio signals are transmitted to
this exclusively.
Shown in the display in standby mode
¬
Device not visible.
©
Device visible to others.
Online settings
Default setting and activation of the
connection profiles for data trans-
mission. The phone default setting
varies from service provider to
service provider. Consult your serv-
ice provider or go to this address on
the Internet for more information
www.BenQ-Siemens.com/mobilesettings
Fax/data
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. fax/data
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program in your PC to re-
ceive the fax/data.
b
b