Alarm - Sharp YO-270 Operation Manual

c Alarm
The organizer has the following three Alarm modes. Once you set
an alarm, a beep sounds for 1 minute at the set time every day or
for a specific date.
Alarm 1: sounds beep two times then interval, repeatedly
Alarm 2: sounds beep three times then interval, repeatedly
Alarm 3: sounds beep four times then interval, repeatedly
Setting the alarm time (and date)
1. If the display is in another mode or World Clock mode, press
h to enter the Home Clock mode.
2. Press A to enter the
Alarm Mode.
Alarm 1 mode will appear.
3. Select an Alarm mode from 1 to 3 using < or >, if required.
4. Press e.
Alarm setting mode appears
and the cursor flashes on the
hour field.
5. Enter the hour.
Note
• Enter the numbers in 24-hour
format.
8
–Alarm 1–
MM/DD
- - : - -
–Alarm 1–
MM/DD - - : - -
–Alarm 1–
MM/DD 07 : - -
• An alarm setting may not be possible for certain days in the next
year.
6. Move the cursor using j or l to the minute field.
7. Enter the minutes.
Continue to enter the date you wish to set in the same manner.
If you wish an everyday alarm
such as a morning call, keep
the date/month field empty.
8. Press x.
9. Enter some comment for your
reminder.
Note
• Up to 40 characters can be entered.
10.Press x.
The Alarm icon will appear on
the display.
Note
• Once the Alarm is set, the set data cannot be deleted.
–Alarm 1–
11/10 7 : 30
–Alarm 1–
MM/DD
7 : 30 AM
Notes: Morning Call I
–Alarm 1–
MM/DD 7 : 30 AM
Morning Call