Controls; Delay Start - Miele PW 5105 Vario Commissioning Manual

Settings/Supervisor level menu

Controls

You can change the way the machine
is used with this setting.
Caution: If "WS with short cut keys"
or "Short cut keys + Logo" mode has
been selected the Settings menu is
not accessible after exiting the
Settings/Supervisor level menu. You
cannot then get back into Supervisor
level. If you need to access it please
contact the Miele Service
Department.
D with short cut keys
(default setting).
WS with short cut keys
There are 4 pre-set (Favorite) programs
only available. These cannot be altered
by the user.
^ Before activating this setting you
must first select the 4 favorite
programs. See "Favorites".
52
Shortcut keys + Logo
(special version for laundry salons).
To configure programs for the basic
menu on variant Shortcut keys + Logo
go to Favorite programs. You can use
your own logo. Follow the Logo setting.

Delay start

Using the timer you can set the time
you wish a program to finish at (see
the Timer section).
The timer can be set to active or
inactive.
The default setting is inactive. If the
Timer button is pressed the display will
only show the program duration, the
time the program is estimated to finish
at and the current time of day.
To close the Settings menu
^ Select Back and confirm your
selection. The display will return to
the entry menu.