Table of Contents
Advertisement
Section 2 - Setting Up With a Web Browser - Router Mode
This page allows you to configure the wireless LAN settings. You can also configure the wireless encryption and wireless network
parameters.
Enabled Access
Use this to disable NAT on the router and turn it into an
Access Point.
Point Mode:
Enable Wireless:
Enable SSID broadcast if you want the router to transmit its
SSID publicly so other wireless devices can discover it.
Name (SSID):
Enter the SSID name you want to use for your wireless
network.
Mode:
Use the dropdown menu to specify the wireless mode.
Channel:
Use the dropdown menu to select the wireless channel.
Band Width:
Use the dropdown menu to select the channel bandwidth.
If you selected the 802.11ac, 802.11n, 802.11 b/g, or 802.11
b/g/n wireless modes, the available options are 20 MHz and
20/40 MHz. 20/40/80MHz(Auto) For the others, 20 MHz is
the only option.
Security
Select a wireless security encryption option. You can also
Options:
choose to not use one by selecting None, but this is not
recommended.
D-Link DIR-516 User Manual
Wireless
• Wireless Settings
19
Advertisement
Table of Contents
