Go to
https://support.lenovo.com/partslookup
part:
Battery pack
Remove the solid-state drive (SSD)
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 30
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove one screw then remove the SSD by pulling it away from the slot.
Figure 6. Remove one screw then remove the SSD by pulling it away from the slot
Screw specifications
M2.0 x L2.3
Go to
https://support.lenovo.com/partslookup
part:
Solid-state drive (SSD)
Remove the Wi-Fi card
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 30
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Detach the main and auxiliary antenna connectors. Remove one screw and then remove the Wi-Fi
card by pulling it away from the slot.
32
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement
Number of screws
1
to look up the Lenovo part number of the following replacement