Pairing The Tv To The Samsung Smart Remote; Installing Batteries Into The Samsung Smart Remote; Using The Tv Controller - Samsung UA78KS9500 User Manual

Pairing the TV to the Samsung Smart Remote

Installing batteries into the Samsung Smart Remote

Using the TV Controller

You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu. The Control
menu appears when the button is pressed while the TV is On. For more information about its usage, refer to the figure below.
When you turn on the TV for the first time, the Samsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press and
hold the buttons labelled
seconds or more.
To install the batteries, push the rear cover open in the
direction of the arrow and insert the batteries as shown
in the figure. Make sure that the positive and negative
ends are facing in the correct direction.
- Alkaline batteries are recommended for longer
Control menu
TV Controller / Remote control sensor
Press: Move
Press & Hold: Select
The TV Controller is placed at the bottom of the TV.
English - 5
and in the following figure simultaneously for 3
battery life.
: Power off
: Channel Up
: Channel Down
: Volume Up
: Volume Down
: Source