Advertisement
Accuracy Under Calibration Conditions
The following accuracy table is valid for calibration under the following conditions:
•
Ambient temperature of 23 °C ± 5 °C
•
NI 9361 installed in slot 8 of an NI cDAQ-9178 chassis
•
Slots 1 through 7 of the NI cDAQ-9178 chassis are empty
Test Point
1 MHz
For operational specifications, refer to the most recent NI 9361 Datasheet
Note
online at ni.com/manuals.
Worldwide Support and Services
The National Instruments website is your complete resource for technical support. At
support, you have access to everything from troubleshooting and application development
self-help resources to email and phone assistance from NI Application Engineers.
Visit
ni.com/services
other services.
Visit
ni.com/register
facilitates technical support and ensures that you receive important information updates from
NI.
National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world.
For telephone support in the United States, create your service request at
dial 1 866 ASK MYNI (275 6964). For telephone support outside the United States, visit the
Worldwide Offices section of
provide up-to-date contact information, support phone numbers, email addresses, and current
events.
Table 5. NI 9361 Base Clock Accuracy
for NI Factory Installation Services, repairs, extended warranty, and
to register your National Instruments product. Product registration
ni.com/niglobal
Specification Limit
50 ppm
to access the branch office websites, which
NI 9361 Calibration Procedure | © National Instruments | 5
ni.com/
ni.com/support
or
Advertisement
