Instrument and control functions
Catalytic converter
This model is equipped with a catalytic
converter in the exhaust system.
WARNING
The exhaust system is hot after op-
eration. To prevent a fire hazard or
burns:
Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
4
Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
Make sure that the exhaust sys-
tem has cooled down before
doing any maintenance work.
Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause unre-
pairable damage to the catalytic
converter.
EAU13434
Rider seat
To remove the rider seat
1. Insert the key into the seat lock,
EWA10863
and then turn it counterclockwise.
1. Seat lock
2. Unlock.
2. Lift the front of the rider seat and
push the seat forward.
To install the rider seat
1. Insert the projection on the rear of
the rider seat into the seat holder
as shown, and then push the front
ECA10702
of the seat down to lock it in place.
1. Projection
2. Seat holder
2. Remove the key.
TIP
Make sure that the rider seat is
properly secured before riding.
4-31
1
2
1
2
EAU49445