Brother HL-B2100D Product Safety Manual page 11

Hide thumbs Also See for HL-B2100D:
Table of Contents

Advertisement

Should you come into contact with toner, follow these instructions:
• Inhalation
Obtain immediate medical attention. In case of accidental inhalation, move to fresh air
immediately, then obtain medical attention.
• Skin contact
Remove contaminated clothing immediately and wash the affected skin with soap and cold
water.
• Eye contact
Obtain medical attention. If the toner has got into the eyes, immediately wash out the eyes
with water continuously, for at least 15 minutes.
• Ingestion
Obtain immediate medical attention. Wash out mouth with water and drink 200 - 300 ml (one
cup) of water.
DO NOT attempt to dismantle the toner cartridge. If toner dust should leak out, avoid inhaling
it or letting it come in contact with your skin.
DO NOT run your hand over the edge of the paper. The thin and sharp edges of the paper
may cause an injury.
This machine contains electronic components that emit electromagnetic radiation during the
printing operation. To avoid the possibility of electromagnetic radiation exposure to your body,
maintain a distance of 7.87 inches (20 cm) from both sides of the machine when printing.
DO NOT remove or damage any of the caution or warning labels inside the product.
IMPORTANT
• A distinct change in the product's performance may indicate a need for service.
• DO NOT connect your product to an electrical socket controlled by wall switches or
automatic timers, or to the same circuit as a large appliance or other equipment that
requires a significant amount of electricity. It could disrupt the power supply. Disruption of
11

Advertisement

Table of Contents
loading

Table of Contents