Table of Contents
Advertisement
DVD SETUP
Display Setting
You can change certain aspects of the DVD display screens,
on-screen messages and the display panel on the front of
the DVD player.
1
Press SETUP in STOP mode.
Press s or B to select
2
• On screen menu will appear.
Press s or B to select
3
confirm.
Press K or L to select the below items, then
4
press ENTER.
TV ASPECT :
• Press K or L for an item
selection, then press ENTER.
• Select 4:3 LETTER BOX for a
black bars appears on top and
bottom of the screen.
• Select 4:3 PAN & SCAN for a
full height picture with both sides trimmed.
PAN & SCAN is only available on DVDs recorded with
this option, if not LETTER BOX mode will be used.
• Select 16:9 WIDE if a wide-screen TV is connected to
the DVD player.
• The default setting is 4:3 LETTER BOX.
• You can also adjust the setting from
menu.
STILL MODE :
• Press K or L for an item selection (AUTO, FIELD, or
FRAME), then press ENTER.
• This adjusts the resolution of still pictures.
• AUTO is normally selected (default).
• If you select FIELD, still pictures will be stabilized
although they will be coarse due to little amount of
data.
• If you select FRAME, still pictures will be highly defined
although they will be blurred due to output of two fields
at the same time.
ANGLE ICON :
• Press ENTER repeatedly to turn Angle icon ON or
OFF.
• The default setting is ON.
AUTO POWER OFF :
• Press ENTER repeatedly to turn Auto Power off ON or
OFF.
• The default setting is ON and it will turn the DVD player
to off automatically after 35 minutes of no use.
PROGRESSIVE :
• Press K or L to set PROGRESSIVE to ON or OFF,
then press ENTER.
• The setting will be effective when you exit the setup
screen by pressing SETUP.
• When PROGRESSIVE is ON, "P.SCAN" appears on
the DVD player's display.
• The default setting is OFF.
• Refer to page 6 for more details.
PANEL DISPLAY :
• Press K or L for an item selection BRIGHT, DIMMER
or AUTO, then press ENTER.
• This adjusts the brightness of the display panel with the
factory default BRIGHT.
• When AUTO is selected, the display dims only during
playback.
5
Press SETUP to exit.
NOTE:
• Be sure to press SETUP, or the setting will not work.
(CUSTOM), then press ENTER.
(DISPLAY), then ENTER to
DISPLAY
TV ASPECT
4:3 LETTER BOX
STILL MODE
AUTO
ANGLE ICON
ON
AUTO POWER OFF
ON
PROGRESSIVE
OFF
PANEL DISPLAY
BRIGHT
(QUICK) setup
– 16 –
Language Setting
Language options are not available with some discs.
1
Press SETUP in STOP mode.
Press s or B to select
2
(CUSTOM), then press ENTER.
• On screen menu will appear.
Press s or B to select
3
GUAGE), then press ENTER to
confirm.
Press K or L to select the below items, then press
4
ENTER.
AUDIO :
• Sets the audio language.
SUBTITLE :
• Sets the subtitle language.
DISC MENU :
• Sets the language for DVD Menu.
PLAYER MENU :
• Sets the language for the On-Screen display.
• You can also adjust the setting from
menu.
Press K or L to select a setting, then press ENTER.
5
• If OTHER is selected in the AUDIO, SUBTITLE or DISC
MENU screen, press four-digit number to enter the
code for the desired language. (Refer to the language
code below.)
• Only the languages supported by the disc can be
selected.
6
Press SETUP to exit.
NOTE:
• Language Setting for Audio and Subtitle is not available
with some discs. Then use AUDIO and SUBTITLE.
Details are on pages 13 and 14.
Returning all selections of SETUP
to their default settings
for PARENTAL)
This allows you to return all selections of SETUP (except for
PARENTAL) to their default settings.
1
Press SETUP in STOP mode.
Press s or B to select
2
TIALIZE), then press ENTER.
3
Select YES.
4
Press SETUP to exit.
NOTE:
• When you cancel to initialize at
step
, select NO.
3
LANGUAGE
(LAN-
AUDIO
ORIGINAL
SUBTITLE
OFF
DISC MENU
ENGLISH
PLAYER MENU
ENGLISH
(QUICK) setup
(except
QUICK SETUP
PLAYER MENU
ENGLISH
(INI-
TV ASPECT
4:3 LETTER BOX
DOLBY DIGITAL
BITSTREAM
INITIALIZE
Initialize?
NO
YES
EN
Advertisement
Table of Contents
