Acer D4K2107 User Manual page 31

HDMI HDMI Color Range
Adjust the color range of the HDMI image data to correct color display
error.
•
•
•
HDMI Scan Info
Adjust the overscan ratio of the HDMI image on screen.
•
•
•
3D 3D
Choose "On" to enable DLP 3D function.
•
•
3D L/R Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute "Invert" to get best match of left/
right image sequence to get the correct image (for DLP 3D).
3D Format
•
•
•
•
•
Note 1: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Note 2: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
Note 3: Functions vary depending on model definition.
Note 4: 3D function is only supported for 120Hz.
Auto: Automatically adjust by information from player.
Limited Range: Process the input image as limited color range
data.
Full Range: Process the input image as full color range data.
Auto: Automatically adjust by information from player.
Underscan: Always no overscan on HDMI image.
Overscan: Always keep overscan on HDMI image.
On: Choose this item while using DLP 3D glasses, 120Hz 3D
capable graphics cards with corresponding SW player.
Off: Turn off 3D mode.
Auto: Based on HDMI information to auto setting 3D format.
Frame Packing: Frame packing is one of the HDMI 3D video
format structures and is composed of two stereoscopic pictures:
Left and Right.
Side by Side Half: Side by Side Half is one of the HDMI 3D video
format structures and is composed of two stereoscopic pictures:
Left and Rig which are sub-sampled to half resolution on the
horizontal axis.
Top and Bottom: Top and Bottom is one of the HDMI 3D video
format structures and is composed of two stereoscopic pictures:
Left and Rig which are sub-sampled to half resolution on the
vertical axis.
Frame Sequential: A stereoscopic 3D format that places each, full
left and right frame in sequence (left, right, left, right, etc.).
20