Program Flow Diagrams - Cobra 12 BAND XRS 9840 Operating Instructions Manual

Program Flow Diagrams

Your Detector
User Settings Programming
User Programming allows you to adjust the unit's display and sounds to
your preferences. The User Settings can be selected using the Dim
City buttons by scrolling through the settings as shown in the program
flow diagram below. The User Programming Menu Guide on page 34 is a
handy reference showing the tone, visual display and voice prompts that
accompany each setting. After selecting a setting, use the Mute
choose an option within the setting.
NOTE
When you choose User Settings (page 11, step 2a), the system displays whichever
setting was last changed.
Setting Selection Buttons:
Dim Button
Press to move to
desired setting.
City Mode
Restore Factory
(Default)
Settings
Warn Low
Car Voltage
if Intellimute
Car Voltage
Not shown if
Show Compass
Display
(Brightness)
Display
SmartPower
Timeout
12 English
Your Detector
Alert Settings Programming
•
Alert Programming allows you to selectively turn on or off detection of some
and signals. The Alert Settings can be selected using the Dim
by scrolling through the settings as shown in the program flow diagram below.
The Alert Programming Menu Guide on page 36 is a handy reference showing
the tone, visual display and voice prompts that accompany each setting. After
button to selecting a setting, use the Mute button to choose an option within the setting.
NOTE
When you choose Alert Settings (page 11, Step 2b), the system displays whichever
setting was last changed.
City Button
X Band
Press to move to
Detection
desired setting.
Mute Button
Press to choose an
option within the setting.
Pop Detection
IntelliMute
Auto Mute This detector allows you to customize its operation by changing settings in
Not shown
the User Programming and the Alert Programming modes. (See page 11 for
Set
IntelliMute
is OFF. entering the EasySet Programming mode.) Also, refer to the Appendix (pages
34–36) while programming. These show the lists of User and Alert settings.
Set
Compass
Features of the programmable settings are described on the following pages.
is OFF.
Alert Type
(Voice/Tone)
Show
Compass
Program Flow Diagrams
and City buttons
K Band
Detection
Ku Band
Detection
VG-2
Audio
Not shown
setting if VG 2
is OFF.
Spectre 1 VG-2
Audio Detection
Not shown
if Spectre 1
is OFF.
Spectre 1
Safety Alert
Detection
Nothing Comes Close to a Cobra
•
® 13