Easyset Programming - Cobra 12 BAND 9375-XRS Operating Instructions Manual

9375-XRS 9830 - Final 4/10/06

EasySet Programming

Your Detector
EasySet Programming
EasySet Programming gives you quick and easy access to all the settings on your
detector. It is used to program both:
I User Settings (see pages 14 and 15)
User Programming Menu Guide (see pages 34 and 35).
I Alert Settings (see page 20)
Alert Programming Menu Guide (see page 36).
Refer also to the Program Flow Diagrams for User Settings and Alert Settings
programming to easily navigate to the setting you want to change (see pages 12
and 13). All settings are stored in memory when the power is turned off and will be
recalled when the power is turned back on.
NOTE
You cannot enter Program mode during an alert. The unit will not detect
signals while in Program mode. During programming, if no buttons are
pressed for 15 seconds, the unit will automatically exit Program mode
and save the most recent settings.
EasySet Programming Buttons:
Mute Button
Press to move
counterclockwise to
desired setting.
Dim Button
Press to choose
an option within
setting.
10 English
12:09 PM Page 10
Your Detector
To use EasySet program mode:
•
1. Press the Menu/Save button to reach the opening program screen.
2. Choose whether you want to change:
a. User Settings — press the Mute
on the display) to enter the User Setting loop (see page 12)
b. Alert Settings — press the City
on the display) to enter the Alert Setting loop (see page 13)
3. Press the City
the chosen settings loop until the desired option is reached.
NOTE
Press and release the button to move one option. Press and hold the button
to scroll through the options (each option will appear for two seconds).
4. Press the Dim
to toggle the option on or off or to step through its multiple choices.
5. Repeat steps 3 and 4 to move to and set the next desired option(s).
6. Press the Menu/Save button when finished to save the settings
and exit EasySet program mode. Or, simply wait 15 seconds without
pressing any buttons.
NOTE
If power is turned off while in Program mode, option settings are saved to those in
effect before Program mode was entered.
City Button
Press to move
clockwise to
desired setting.
Menu/Save
Button
Press to reach the
opening program
screen.
EasySet Programming
button (above the User Settings icon
button (above the Alert Settings icon
or Mute buttons to step forward or backward through
button (above the down arrowhead on the display)
Nothing Comes Close to a Cobra ® 11