Table of Contents
Advertisement
HDMI Colour Mode
This setting is for selecting colour-space
conversion of the image signal.
Deep Colour Output
This setting is for selecting whether to use Deep
Colour output when a TV that supports Deep
Colour is connected.
Contents Type Flag
Depending on the playback content, the TV will
output adjusting to the optimal method when a
TV that supports this function is connected.
HDMI(SUB) Output Mode [BDT335]
Set to output the video from the HDMI AV OUT
SUB terminal or not.
Settings
Sound
∫ Dialogue Enhancer
∫ Dynamic Range Compression
You can listen at low volumes but still hear dialog
clearly.
(Dolby Digital, Dolby Digital Plus and Dolby
TrueHD only)
≥ "Automatic" is effective only when playing
Dolby TrueHD.
∫ Digital Audio Output
Press [OK] to show the following settings:
Dolby D/Dolby D +/Dolby TrueHD
DTS/DTS-HD
Select the audio signal to output.
≥ Select "PCM", when the connected
equipment cannot decode the respective
audio format. This unit decodes the audio
format and transmits to the connected
equipment.
≥ Not making the proper settings may result in
noise.
BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If "Off" is selected, the unit outputs the primary
audio only.
HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ Select "Off" when the TV is connected to this
unit via HDMI AV OUT terminal, and this unit
is also connected to other devices, such as
an amplifier/receiver via an OPTICAL
terminal.
- 31 -
(
29)
Advertisement
Table of Contents
