Step 8 Position Water Line And Power Supply - GE HDA2100HCC Installation Instructions Manual

STEP 8 POSITION WATER LINE
AND POWER SUPPLY
• Position water supply line and house wiring on the
floor of the opening to avoid interference with base
of dishwasher and components under dishwasher.
Water
Line
INSERT DRAIN HOSE AND
STEP 9
POWER CORD, IF USED,
THROUGH CABINET
• Upright the dishwasher and position it in front of the
cabinet opening.
• Insert the drain hose into the hole previously drilled in
the cabinet wall.
• If a power cord is used, guide the end of the cord
through a separate hole cut for the power cord.
The power cord should be routed directly to the rear
of the junction box, avoiding contact with the door
spring and other dishwasher components.
Drain
Water
Tip: Avoid unnecessary service charges for no fill,
drain or noise concerns.
Position utility lines so they do not interfere with
anything under or behind the dishwasher.
Dishwasher Installation
Power
Supply
Power
INSTALL OPTIONAL
STEP 10
GPF65 SIDE MOUNT
BRACKETS
Skip this step if the underside of countertop is
wood or woodlike material.
• Purchase and install the GPF65 side-mount bracket kit
if the underside of counter is granite or a similar material
that will not accept wood screws. The GPF65 kit is
available from authorized GE Appliances dealers.
• Refer to figure and follow the instructions included in the
kit.
Side- Mounting
Brackets
Tub Frame
Optional
Side-Mount
Bracket Kit
9
Bracket
Attachment
Screws
(2 Each
Side)