Table of Contents
Advertisement
Clean with some washing-up liquid and a
Knobs
damp cloth. Dry with a soft cloth.
Can be cleaned with glass cleaner. Do not
Door glass
use any harsh cleaning agents or sharp metal
objects. These could scratch and damage the
surface of the glass panel.
Clean with some washing-up liquid and a
Seal
damp cloth. Dry with a soft cloth.
Clean with hot water or vinegar solution. For
Oven roof
heavy soiling: Only use oven cleaner on cold
surfaces.
Clean with some washing-up liquid and a
Glass cover on
damp cloth. Dry with a soft cloth.
the oven light
Soak in hot soapy water. Clean with a brush
Accessories
or a sponge.
Do not clean in the dishwasher. Never use
Aluminium
oven cleaner. To avoid scratches, never touch
baking tray
the metal surfaces with a knife or similarly
(option)
sharp object. Clean horizontally with some
washing-up liquid and a damp glass cleaning
cloth or a microfibre cloth. Dry with a soft
cloth. Do not use any abrasive materials,
scouring sponges or rough cleaning cloths.
They could scratch the baking tray
If a childproof lock has been fitted on the
Childproof
oven door, it must be removed before clean-
lock (option)
ing. Soak all plastic parts in hot soapy water
and wash with a sponge. Dry with a soft cloth.
If very dirty, the childproof lock will not work
properly.
Information on care and cleaning can be
Hob
found in the instruction manual for your hob.
Cleaning the self-cleaning surfaces in the
oven
The back wall, roof and side walls of the oven are coated with
self-cleaning enamel. This coating absorbs and dispels
splashes from baking and roasting while the oven is in
operation. You will obtain a better result, the higher the
temperature and the longer the oven is in operation.
If soiling is still visible after several uses, proceed as follows:
First clean the oven floor.
1.
Set the oven to Hot air
2.
Heat the empty oven for approx. 2 hours at maximum
3.
temperature.
The ceramic coating is regenerated. Brownish and black
residues can then be removed with water and a soft sponge.
Slight colour variations of the coating have no effect on the self-
cleaning function.
Caution!
Never use abrasive cleaners. This could scratch or damage
■
the highly porous surface coating.
Do not use oven cleaner on self-cleaning surfaces. If oven
■
cleaner is accidentally applied to these surfaces, wipe it away
immediately with a sponge and plenty of water.
Detaching and refitting the rails
The rails can be removed for cleaning. The oven must have
cooled down.
Unhooking the rails
Hold the shelf frames from underneath and pull slightly
1.
forward. Pull the extension pins at the bottom of the rails out
of the mounting holes (Fig. A).
or Top/bottom heating
2
Then fold the rails upwards and carefully remove them
2.
(Fig. B).
Clean the rails with washing-up liquid and a sponge. For
stubborn deposits of dirt, use a brush.
Installing the frames
Insert the two hooks carefully into the upper holes. (Figure A-
1.
B)
:
Incorrect assembly!
Never move the frame before the two hooks are fully
anchored in the upper holes. The enamel could be damaged
and may break (figure C).
.
%
the two hooks must be inserted fully into the upper holes.
2.
Now move the frame slowly and carefully downwards and
insert in the lower holes (figure D).
Insert both frames into the side walls of the oven (figure E).
3.
If the rails are fitted correctly, the distance between the two
upper shelf positions is greater.
9
Advertisement
Table of Contents
