Advertisement
Quick Links
Quick instructions
IS 410
Connecting the system components
Plug in one end of the connecting cable
If necessary, use one of the adapters
Plug in the other end of the connecting cable
Connect the mains unit
Place the receiver into the transmitter's charging compartment
Before you use the rechargeable battery
green.
Adjust the volume of on your sound source to a sufficient (medium) level.
Switching on and using the stethoset receiver
The receiver automatically switches on when you pull the earbows apart.
First adjust the volume to a low level. This protects your hearing from damage.
Then put the receiver on and adjust the volume to a comfortable level.
Use the balance control
If you cannot hear anything through the receiver, increase the volume of on your sound
source.
Switching the stethoset receiver off
The receiver automatically switches off when you take it off.
Charging the stethoset reciever
Place the receiver into the transmitter's charging compartment
pressure. With a fully charged battery, the operating time is approx. 16 hours.
For details on the use of the IS 410, please refer to the enclosed operating instructions.
Sennheiser electronic GmbH & Co. KG
30900 Wedemark, Germany
A
B
C
to the socket on your sound source (e.g. television).
,
to the transmitter
to adjust the volume between the left and right ear.
Phone +49 (5130) 600 0
Fax +49 (5130) 600 300
www.sennheiser.com
or
(not included).
to the blue socket
and to the mains.
for the first time, charge it until the LED
on the transmitter.
.
lights up
without exerting too much
Printed in China
Publ. 10/06
517639 / A02
Advertisement
