Brother DCP-L3515CDW Quick Setup Manual

D027VF001-00
Version 0
EN
Unpack the machine and check the components
Toner Cartridge and Drum
(Black, Cyan, Magenta, and
* Installed in the machine
1
Remove the packing materials and re-install the toner cartridge and drum unit assemblies
Remove all the blue packing tape.
Remove the orange parts
from each cartridge.
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
NOTE:
Before connecting the power
cord, locate the Serial
Number label on the back or
side of the machine. Record
this number for Registration
and Warranty support.
Back
Quick Setup Guide
DCP-L3515CDW / DCP-L3520CDW / DCP-L3520CDWE / DCP-L3527CDW /
DCP-L3555CDW / DCP-L3560CDW / MFC-L3740CDW / MFC-L3740CDWE /
UK MFC-L3760CDW / MFC-L8340CDW / MFC-L8390CDW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
Video setup instructions:
support.brother.com/videos
Waste Toner Box*
Unit Assemblies*
Yellow)
AC Power Cord
BK
x4
Location of the power button varies depending
on the model.
Belt Unit*
Quick Setup Guide
Product Safety Guide
Push firmly.
C
M
Y
Adjust the paper
guides.
Front
The latest manuals are available at the Brother support website:
support.brother.com/manuals
NOTE:
• The components included in the box may differ depending on your
country.
• The available connection interfaces vary depending on the model.
You must purchase the correct interface cable if you require one.
• USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
• Network cable (DCP-L3555CDW / DCP-L3560CDW /
MFC-L3740CDW / MFC-L3740CDWE / MFC-L3760CDW /
MFC-L8390CDW)
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The illustrations in this Quick Setup Guide show the
MFC-L8390CDW.
• Brother aims to reduce waste and save both raw materials and the
energy required to produce them.
Read more about our environmental work at www.brotherearth.com.
Do not exceed this mark.
4 Select your country/language
(Initial setup only)
After turning the machine on, you may be required
to set your country or language (depending on your
machine).
If required, follow the on-screen instructions.