Table of Contents
Advertisement
Available languages
Available languages
Never use strong solvents such as a thinner,
alcohol or benzine for cleaning.
Do not plug in the display into the wall outlet
until the moisture from cleaning has
evaporated.
Periodic vacuuming of the ventilation openings
is recommended to ensure to proper
ventilation.
Installing the display in an enclosed area
Ventilation
Never cover the ventilation holes or insert
anything into the cabinet.
Leave space around the display as shown
below.
Installed with stand
Leave at least this much space around the set.
7
30 (11
/
)
8
10 (4)
Installed on the mount arm
Leave at least this much space around the set.
7
30 (11
/
)
8
10 (4)
Never install the display as follows:
Air circulation is blocked.
The ventilation holes on the back are
blocked, and heat builds inside.
4
EN
3
6 (2
/
)
10 (4)
8
Unit: cm (inches)
13
2 (
/
)
10 (4)
16
Unit: cm (inches)
Do not block the air circulation area.
Note
Inadequate ventilation can lead to overheating
of the display and may cause damage to your
display or cause a fire.
Never insert USB plug when the product or
charging cable is wet condition
When the USB plug is inserted in a wet
condition, a short circuit occurs due to the
liquid (tap water, salt water, refreshing drink
etc.) attached to the main unit and charging
cable or foreign matter, it may cause abnormal
heat generation or malfunction.
NOTE ON AC ADAPTER
Warning
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. To
prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the
apparatus. Do not install this equipment in a
confined space, such as a bookshelf or similar
unit.
Please ensure that the AC power outlet is
installed near the equipment and shall be
easily accessible.
Be sure to use the supplied AC adapter and AC
power cord. Otherwise it may cause a
malfunction.
Connect the AC adapter to an easily accessible
AC power outlet.
Do not coil the AC power cord around the AC
adapter. The core wire may be cut and/or it
may cause a malfunction of the display.
Do not touch the AC adapter with wet hands.
If you notice an abnormality in the AC adapter,
disconnect it from the AC power outlet
immediately.
The set is not disconnected from the AC source
as long as it is connected to the AC power
outlet, even if the set itself has been turned off.
As the AC adapter will become warm when it is
used for a long time, you may feel hot when
touching it by hand.
Air circulation
Advertisement
Chapters
Table of Contents
