Switch Leds - Cisco MDS 9396V Hardware Installation Manual

Overview
Figure 4: Grounding Point
1
2

Switch LEDs

The following table describes the chassis LEDs for Cisco MDS 9396V switches:
Indicator
Power LED
Grounding point
Rack mount holes
Location Function
Front panel Chassis Off
of chassis power/Health
Green
Red
Cisco MDS 9396V Multilayer Fabric Switch Hardware Installation Guide
Port side of the switch
3
Color Status
Off Either of the following conditions exists:
• The system is not receiving
• The operating system is not
Solid On Both PSUs are installed and operating
Solid On Either of the following conditions exists:
• A PSU has failed.
• A PSU has been removed.
Switch LEDs
State
sufficient power from the PSUs.
running.
7