Table of Contents
Advertisement
Low temperature button K
^ For drying particularly sensitive
fabrics (care symbol r), e.g.
acrylics, press the Low temperature
button.
When Low temperature K is selected,
programme durations are longer
because drying is carried out at a lower
temperature.
+ button
^ See "Delay start".
Coin operation/payment system
If your dryer is connected to a payment
system, the amount of credit required
will appear in the display.
Credit will be lost if, after the
programme has started, the door is
opened or the programme cancelled
(depending on how the dryer was
set up).
D Start the programme
The indicator for the Start button will
flash as soon as a programme can be
started.
^ Press the Start button.
– Prog. running will appear in the
display, followed by Drying and the
programme duration.
– With sensor drying programmes, e.g.
Machine iron, Hand iron etc., the
drying level reached will be shown in
the display later on.
Short instructions
Changing the programme sequence
Further information about the following
can be found under "Changing the
programme sequence":
– Payment system
– Changing a programme once it has
started
– Cancelling the current programme
– Adding or removing laundry after a
programme has started
– Interruption to the power supply
– Time remaining
Programme duration/Estimated time
remaining
When a programme is selected, the
estimated duration will appear in the
display. Please be aware that it is only
an estimate.
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the dryer and adjust the
estimated time remaining for a more
accurate reading. Because of this, the
time displayed can alter during the
course of a programme.
23
Advertisement
Table of Contents
