Charge Batteries - Corega BTSHS01 User Manual

Charging Batteries
BTSHS01 User Manual 3
For the first time using, it takes 4 hours to fully charge the batteries
and 2 hours afterwards. After the batteries were fully charged, talking
time is up to 8 hours and the standby time is up to 160 hours.
(
* Various usage patterns may adversely affect battery performance)
The following figure is the Battery Charging instructions:
1. Connect the T-Connector to the power adapter
2. Connect the stereo headset to the T-Connector
3. Connect the stereo adapter to the T-Connector
4. Plug the power adapter into an electrical outlet.
When start charging, the RED LED is steady on. Until the batteries
are fully charged, RED LED is then off and power adapter should be
unplugged and removed from electrical outlet.
*Note: Alternatively, both devices can be charged through USB port by
using USB charger provided.
6