Lenovo 16ACH6H Hardware Maintenance Manual page 52

Figure 30. Disconnect the EDP cable from the system board and then remove four screws
Screw specifications
M2.5 x L7
M2 x L3.0
Step 2. Turn over the computer and remove two screws. Lift the LCD module carefully.
Figure 31. Turn over the computer and remove two screws. Lift the LCD module carefully
Screw specifications
M2.5 x L7
Step 3. Take out the EDP cable and then remove the LCD module.
46
Hardware Maintenance Manual
Number of screws
2
2
Number of screws
2