Table of Contents
Advertisement
Main Menu
Main Menu
Table of Contents
Multi-Information Display
Meter Setup
With the ignition switch in the ON
(II) position, press the INFO button
for more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
information display.
Select CHG SETTING, and press the
SEL/RESET button.
Select METER SET UP, and press
the SEL/RESET button.
Each time you press the INFO ( /
▼
) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode:
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP.
DISPLAY
TRIP A & AVG. FUEL A RESET
with REFUEL
If you select EXIT by pressing the
SEL/RESET button, the
CUSTOMIZE ENTRY screen is
shown again.
82
▲
Press the
▲
Press the SEL/RESET button.
or
▼
button.
Advertisement
Chapters
Table of Contents
