Scotsman FM2400RH Service Manual page 4

FM2400RH
Electrical Connections:
Locate the nameplate for the current requirements,
and then determine the wire size and type per the
National Electric Code. The machine requires a
solid chassis to earth ground wire.
Refer to the wiring diagram. The ice
DETAIL OF
machine should be connected to it's
JUNCTION BOX
own electrical circuit, and be
individually fused.
Voltage, when the unit is under full
load, must remain within the limitations
listed on page 2.
LOW VOLTAGE CAN CAUSE
EQUIPMENT MALFUNCTION
JUNCTION
AND/OR DAMAGE
BOX
All external wiring should conform to
the National, State, and local electrical
POWER SUPPLY
codes. Usually the services of a
licensed electrician will be required.
August 1994
Page 4