Table of Contents
Advertisement
Troubleshooting
Problem
The dishes are not clean.
40
Possible causes
The spray arms do not rotate.
Spray arm holes or bearings
blocked.
Unsuitable dishwashing
program.
Incorrect detergent dosage.
Old detergent. Detergent is a
perishable product.
Auto dose is activated but
dishwasher detergent gel is not
dispensed.
Dishes loaded incorrectly.
Glasses and cups have toppled
over during the program.
The filters are clogged.
The filters are not fitted correctly.
Drainage pump stop missing.
Action
Check that the dishes are not
blocking the spray arms.
Clean the spray arms. See
Chapter Care and cleaning.
Select a program with Intensive.
The program will use a higher
temperature to dissolve grease
on very dirty dishes.
Dose according to water
hardness. Far too much or far
too little detergent results in
poorer dishwashing results.
Avoid large packages.
To check that detergent is
dispensed, press and hold
and
for five seconds. The
symbol
will flash on the
display and the status light will
turn red. Now check whether
any dishwasher detergent gel
has been dispensed.
Do not cover porcelain with
large bowls or similar. Avoid
placing very tall glasses in the
corners of the baskets. See the
chapter, Loading the
dishwasher.
Place dishes to sit steady.
Clean the coarse and fine filters.
Check that the filters are fitted
correctly. See the chapter, Care
and cleaning.
Check that the yellow drainage
pump stop (on the right in the
bottom drain) is in place. See
the chapter, Care and cleaning.
Advertisement
Table of Contents
