Removing The Stand - Samsung LC24RG50FQRXXU User Manual

Removing the Stand

― Before removing the stand from the product, place the product on a flat and stable surface with the screen
facing down.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product.
When the product is on the ground facing up or down, do not put pressure on it.
1
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image. If Styrofoam is unavailable, use a thick
sitting mat.
2
To disassemble the stand from the monitor, be sure
to press the lower part of the monitor with one
hand, and shake the stand from side to side with
the other hand to make some gap between them.
Caution
Do not hold the product upside down only by the
stand.
3
Press the lower part of the monitor with one hand,
and pull the stand with the other hand in the
direction of the arrow as shown in the figure.
Caution
Do not press down on the product. There is a risk of
damaging the product.
4
Remove the stand neck from the stand base by
turning the screw in the arrow direction as shown
in the figure.
19