Prem-I-Air EH1620 User Manual page 2

These instructions should be read carefully and left with the user of the product
for future reference.
To assemble the fan;
Remove the grille lock nut(4) from the motor shaft(6)
•
Fit the rear grille by positioning the locating pins in the horizontal slots on
•
the grill. Secure the grill to the body with the grille lock nut(4)
Push the fan blade (3) onto the motor shaft (6) positioning the slots on the
•
rear of the blades in the shaft pin on the motor shaft.
Secure the fan blades using the fan blade nut (2), noting that the nut has a
•
left handed thread (turn anti-clockwise to tighten).
Open all the securing clips around the front grille(1) and loosen the securing
•
screw(14).
Line up the screw(14) with the corresponding hole in the rear grille and
•
tighten
Line the front grille (1) with the rear grille (4) and press the front grill firmly
•
into position. Close all the clips and tighten the safety screw.
The remote control takes 2 AAA batteries. Remove the rear cover of the
•
remote control and insert the batteries, taking care to observe the correct
polarity.
2818
IMPORTANT
Installer and Users please note:
Assembly
2
Ver. 3 - 04/14