Advertisement
5. Ready to Watch Some TV?
Starting up the X42 LCD HDTV
1. Make sure your power cable is connected and the standby red light in the front of the TV
is lit up.
2. Check all your connection cables off the side or the back of your TV and also your AV
devices. Make sure they are all connected securely.
3. Turn on your TV and other AV devices if necessary.
4. Select the correct source according to the Connecting pages.
If You've Connected Antenna or Cable to the TV...
If an antenna or cable (without a cable box) is connected to your TV's tuner, you will need to go through an
INITIAL SETUP process in order to watch the TV. When you turn on the TV for the first time, the INITIAL
SETUP screen will come up. Follow through the instructions to complete the setup and your TV will be ready
for viewing.
1.
Press ENTER to start the setup.
▲▼
2.
Use the
buttons to select your language and press
↵
.
Advertisement
