Dell UltraSharp 38 Service Manual page 14

5
USB BD FFC
NOTE
To unplug "USB BD FFC" from I/F BD, please
press and hold the center of connector (see
yellow mark) first, then, take off "USB BD FFC"
from I/F BD. Do not pull out "USB BD FFC"
6
directly by force. Otherwise, "USB BD FFC" will
be damaged.
1. Unplug "Backlight
Wire" from LED
Driver BD
(See pink mark)
2. Unplug "Speaker
Wire" from I/F BD
(See red mark)
3. Tear off 6 tapes
from "Speaker
Wire" and Panel
(See blue Mark)
1. Tear off an acetate
tape from "USB BD
Wire" and Panel
2. Unplug "USB BD
Wire" from I/F BD
3. Press and hold the
center of connector
to unplug 2 "USB
USB BD Wire
BD FFC" from I/F
BD
- 14 -