Advertisement
Quick Links
Advertisement
Related Manuals for Hifonics BXiPRO1.5
Summary of Contents for Hifonics BXiPRO1.5
- Page 1 Operator’s Guide BXiPRO1.5 Digital Bass Enhancement Processor...
- Page 2 Thank you for purchasing the HIFONICS BXiPRO1.5 Digital Bass Enhancement Processor. This unit has the ability to fine tuning bass width and sweep for increased sound performance. Please read the entire manual to ensure proper connections and application. CAUTION Always consider consulting a professional audio installer before installing any audio components.
- Page 3 Mounting and Hardware Prior to mounting, connect the wires to ensure proper operation. MOUNTING 1. Select the desired mounting location that allows the unit to be mounted on a flat surface with room for connections. 2. Use the mounting brackets that are attached to the unit and use the provided hardware for mounting the unit.
-
Page 4: Functions And Operations
Functions & Operations Adjustable bass enhancement preamp output Bass remote input Adjustable bass level output Adjustable bass width and sweep adjustments Low level inputs (RCA level) Power connector with remote output trigger wire Bass knob to control bass level output... - Page 5 Functions & Operations...
-
Page 6: Frequency Response
Frequency response Full Range Width Narrow Wide Width Control Controls how wide the frequency range that is centered on the sweep frequency Frequency response Full Range Sweep 50Hz 100Hz Sweep Control Allows you to select the center frequency the BXiPRO1.5 outputs... - Page 7 Unit Setup with Aftermarket Source Unit...
-
Page 8: Diagnostics And Troubleshooting
Diagnostics & Trouble Shooting The key to finding the problem in a troubled sound system is to isolate parts of that system in a logical fashion to track down the fault and correct the issue. The diagnostic system will not shut down the crossover or the amplifier(s), although the amplifier(s) own protection circuitry may shut the amplifier(s) down, should a fault status occur. -
Page 9: Specifications
Specifications Size 109W x 93L x 30.5H Fuse value 1A mini ATC Voltage range 9.5V -15V Bass remote type HF-U-01 Maximally Flat Frequency Response Main (-3dB) 20Hz to >20kHz Input Impedance Low level inputs 20k Ohms Maximum low level Input Voltage on any input >9.1V before clipping Maximum Output voltage at 1.0% THD+N... - Page 10 USA Inc. This warranty is limited to defective parts and specifically excludes any incidental or consequential damages connected therewith. To view the full warranty, please visit the website. Autotek products are designed and engineered in the USA by www.maxxsonics.com HF BXiPRO1.5 QSG 01 - rev1...