Advertisement
Quick Links
Electric Horn
QAP100H-N/ QAP125H-N
25
50
65
HORN
Thank you for purchasing Qlight's products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the
product that would void the warranty.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product's specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
6. Failure to follow any of the instructions above may cause malfunction or damage to the product, fire, and electric shock.
Ordering Specifications
QAP100H-N
-
[Model number]
|
• QAP100H-N
• 12/24-DC12V-24V
• QAP125H-N
• 110/220- AC110V-220V
Please scan the QR code for more
detailed product information.
www.qlight.com
100
115
HORN
110/220
[Voltage]
|
Product Specifications
Model
Voltage Current
number
DC12
Max.
-24V
1.100A
QAP100H-N
AC110V
Max.
-220V
0.160A
DC12
Max.
-24V
0.830A
QAP125H-N
AC110V
Max.
-220V
0.170A
• Protection rating : IP65
• Ambient operating temperature : -25°C to +50°C
1
Sound pattern and
Certificate
volume
• Bit Input : 5Ch
• Binary Input : 30Ch
• Built-in sounds
: Max.100dB
(Based on WA-Ch4)
• Bit Input : 5Ch
• Binary Input : 30Ch
• Built-in sounds
: Max.115dB
(Based on WA-Ch4)
Weight
0.60Kg
0.63Kg
0.70Kg
0.73Kg
Advertisement
Related Manuals for Qlightec QAP100H-N
Summary of Contents for Qlightec QAP100H-N
- Page 1 Electric Horn QAP100H-N/ QAP125H-N HORN HORN Thank you for purchasing Qlight’s products. Please read this user manual carefully prior to installation and operation to ensure safe and correct use. Precautions for Safety Failure to follow the instructions below may cause a loss of life or serious physical injury.
-
Page 2: Wiring Instructions
Fuse Power Black Black • External power line - UL1015 AWG18(0.75sq) x 2C 400mm External signal line - UL1007 AWG22(0.3sq) 400mm • QAP100H-N : This product can be wired regardless of polarity. • QAP125H-N : Black output line is negative(-). - Page 3 Bit/ Binary Input Method Depending on Wiring Method ■ Bit Input Mode The channel selection method Ch 1 Ch 2 Ch 3 Ch 4 Ch 5 ※ • Bit input mode(using external line) allows you to select using a transistor is the same one of five sound options by switching on one of the 5 as the external contact method, channels (Ch1 - Ch5).
-
Page 4: Volume Adjustment
Top Control Configuration Volume Adjustment • The volume output of this product is adjustable. • Turn the volume dial clockwise to increase the volume, and Volume switch turn counter clockwise to decrease the volume. Sound switch • There will be no sound when the dial is put at MIN. Volume Dial MAX. - Page 5 Sound Type and Combination Manual ■ Sound Type by Group ■ Binary Input - Playing Built-in Sound • In binary input mode, you can chooses one sound from 30 Bit input method sound configuration sounds by configuring the 5 channels. Group Channel Type of sound...
- Page 6 Operation Method and Setting When Using a Built-in Sound Source Bit input Binary input Play one of five sounds from Play one of 30 sounds 6 groups ■ When using a built-in sound source in bit input mode ■ When using a built-in sound source in binary input mode ※...
- Page 7 Product installation direction ■ Install the product in accordance with the manual. Otherwise rainwater or moisture may penetrate into the product. ㆍBEACON/SIGNALING LIGHT ※ For products with a protection rating of less than IPX4, please install it vertically. Power cord inlet part shall not be facing the sky. ㆍ...
- Page 8 RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Head office : Suite #1510, STX-V Tower, 128 Gasan digital 1-ro, Geumcheon-gu, Seoul, Korea (Postal Code : 08507) Factory : 185-25, Mukbang-Ro, Sangdong-Myeon, Gimhae-Si, Gyeongsangnam-Do, Korea (Postal Code : 50805) www.qlight.com EN - QAP100H-N - 2305A...