Video Mode; Selecting Video Mode - Sanyo PLC-XR70N Owner's Manual

VIDEO MODE

Direct Operation
Press the MODE button on the Front Control or the VIDEO
button on the Remote Control Units. Select the Mode among
Video 1 to Video 3 corresponding with the input source. The
display of "Video 1," "Video 2," "Video 3," "Computer 1,"
"Computer 2," or "Computer 3" appears on the screen for a few
second. (The "Video 1," "Video 2," or "Video 3" appears when
pressing the VIDEO button.)
Video 1
Video 2
Video 3
Menu Operation
1 Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Video
press the SELECT (REAR CLICK) button. Another dialog box
VIDEO MODE Menu will appear.
2 Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the mode among Video1 to Video3 that you
want to select, and then press the SELECT (REAR CLICK)
button.
34

SELECTING VIDEO MODE

Displaying the image from "Video 1" on
the Rear Terminal.
Displaying the image from "Video 2" on
the Rear Terminal.
Displaying the image from "Video 3" on
the Front Terminal.
MODE button
Video 1
Video 2
Video 3
Computer 1
Computer 2
Computer 3
and
VIDEO button
Video 1
Video 2
Video 3