Wall Mounting (Optional); Positioning The Lcd Hdtv; Getting Started; Precautions - Sanyo DP42848 Owner's Manual

WALL MOUNTING
Use the screws you removed when dettaching the
stand to secure the HDTV to a wall mounting kit.
NOTE:Wall Mounting kit is not supplied.
VESA standard interface:
400 x 400
Mounting screws measurements:
M6 Diameter, Length—12mm (min.); 16mm (max.)
Wall Mounting
Inserts

POSITIONING THE LCD HDTV

Always use a firm-flat surface when posi-
tioning your HDTV. Do not position the
unit in a confined area. Allow adequate space for
proper ventilation.
DP42848
(DP46848)
NOTE: All dimensions are in inches.
(OPTIONAL)
Need help?
Visit our Web site at

GETTING STARTED

1 Install supplied batteries in the Remote.
eneloop
(2
"AAA"
P
RECAUTIONS
Do not use rechargeables together with
dry cells, other types, mixed new and old,
or batteries with different charge levels.
Do not expose the Remote or batteries
to moisture or heat.
Match the "+" and "–" signs on the batteries with marks
inside the Remote Control.
eneloop
For battery recharging, please refer to your
battery charger's instructions
Please recycle used up rechargeable batteries.
For more information visit: www.eneloopusa.com
2 Antenna Connection for off-air signals.
ANTENNA
OR
CABLE
THE TUNER IN THIS HDTV CAN RECEIVE :
a. Digital and Analog off-air signals from an
antenna.
b. Analog or ClearQAM cable channels from a
direct Cable TV connection.
NOTES: You must use the on-screen MENU to
Search for ClearQAM Cable channels. See
page 11.
For the best picture, connect your Cable box
or Satellite receiver to HDMI1, 2, 3, or com-
ponent jacks (Video2 or 3).
This HDTV can receive ANY unscrambled RF
signal being broadcast.
www.sanyoctv.com
rechargeable batteries)
Ni-MH
(battery charger not included).
ANALOG / DIGITAL
ANTENNA IN
OR
1-800-877-5032
or Call
5