Checking The Battery Status; Charging Mobile Devices With The Power Bank - Tronic TPB 20000 A1 Operation And Safety Notes

Checking the battery status

You can check the battery status via the LED indicator
power bank 3
Briefly press the ON / OFF button
7 shows the approximate charge status of the internal
battery capacity level for approx. 30 seconds.
Charging mobile devices with the
power bank
You can charge up to two devices at the same time using the
power bank
3
sum of the output current may not exceed 3 A.
To charge your QuickCharge 3.0 enabled device, connect
the USB Type A plug of USB cable
Type A to USB Type C charging cable of the device to
be charged to the USB type A output
QuickCharge 3.0. Then connect the USB Type C plug of the
USB cable
be charged. The charging process will start automatically.
When a QuickCharge enabled device is charged at the
Type A port, the fourth LED of the battery capacity indicator
lights up green.
NOTE: You could also charge your conventional USB
devices from the USB Type A output port
using the included USB cable
USB cable (not included).
To charge your USB Power Delivery (PD) enabled device,
connect the USB Type C plugs of your USB Type C to Type
C cable (not included) to the PD port
and the PD port of the device to be charged. The charging
process will start automatically. When a PD enabled device
at anytime.
. If all outputs are used at the same time, the
4 to the USB Type C input port of the device to
6 . The LED indicator
4 or the original USB
which supports
2
2 of the power bank
or a USB Type A to micro
4
1 of the power bank
of the
7
GB/IE 33